1. Straps go over the inside/screen door.
   Note: Straps buckle between the internal and external doors (not outside the external door).

2. Position the door storage. If your door has a vent in it, ensure that the Door Storage does NOT COVER VENTS.

3. When buckled, pull the straps tight to full tension to secure it in place.

4. Optional adhesion points: There are 6 rectangular strips (hook and loop fasteners) that can attach to the door for extra adhesion. Once the Door Storage is in position, check that the 6 strips that will attach to the door have a flat surface behind them.

5. Important: The strips that stick to the door do not have to match exactly to the strips sewn into the product. If your door is a wider version, you can turn the strips that stick to the door horizontal.

6. Wipe the door surface with rubbing alcohol so that it is clean. 

7. Starting from the top strips, peel the backing paper off.

8. Firmly apply to the surface, hold for 15 seconds.

9. Leave for 24 hours for maximum adhesion, before attaching the Door Storage to it.

 

Door not included.